Fagor IO-HOB-0990, Инструкция по эксплуатации

Страница: 36 / 48

36
INSTALLATION
Tips for the installer
The installer must:
● Have appropriate qualification
● Read the information on the nameplate
or information sticker concerning the
type of gas, for which the appliance is
intended. This information must be com-
pared with the gas supply specification
at the place of installation.
● Check
- effectiveness of ventilation, i.e. ex-
change of air in the room.
- tightness of gas fittings.
- proper operation all the functional com-
ponents.
● For proper operation of igniters and
flame failure cut-off device , adjust the
position of the gas knobs with the sup -
plied washers,
- check the operation of igniters and flame
failure cut-off device,
- In the event of faulty operation, remove
the knob, make adjustments by inserting
a washer (washers) on the valve pin,
- once adjusted, protect the system with a
clamping washer and replace the knob.
● Provide the user with the gas hob instal -
lation certificate and give instructions on
the appliance operation.
CAUTION!
Only a qualified person must con -
nect the appliance to a liquid gas
cylinder or an existing system, fol-
lowing all safety regulations.
The appliance has an G 1/2" threaded pipe
connector to connect it to the gas system.
The LPG (propane-butane) hob version has
the connector terminated with a hose tip
∅
8 x 1 mm.
Gas supply hose should not touch the metal
parts of the cover.
ENSURE the connections are tight .
Once you install the appliance,
check all connections for leaks, for
example using soapy water.
Do not use fire to check the con -
nections.
Carefully read the operating in-
structions supplied and follow all
guidelines.
C A U T I O N !
You are dealing with gas. The appli -
ance must be supplied with the type
of gas specified by the manufacturer.
Only a qualified person must in -
stall the appliance.
Information on the type of gas for
which the appliance is designed is
given on the nameplate.