EN - I
6
7. THE CONTROL PANEL
3 1 2 4 5 i ii iii
1.
On/Off button
2.
Program Selection Button
3.
Display
4.
Delay Button
5.
Half Load Button
i.
Half Load Led
ii.
Salt Indicator
iii.
Rinse Aid Indicator
1. On/Off Button
Switch the machine on by pressing
On / Off button. When machine is on, "--"
will be shown on the Display (3).
2. Program Selection Button
Select a suitable programme for your
dishes by pressing Program Selection
button. The programme will start
automatically when the door is closed.
3. Display
The Display shows the number and total
time of the selected programme alternately
and the remaining time during operation.
4. Delay Button
Press the Delay button to delay the start
time of the selected programme for 1
hour up to 19 hours. Pressing the button
once delays the start time for 1 hour, and
continuing to press will increase the delay
time. Press the Delay button to change or
cancel the delayed start. If you switch off
the machine while delay timer is active, the
delayed time is cancelled.
5. Half Load Button
Press the Half Load button to reduce the
duration of the selected programme, and
therefore decrease your energy and water
consumption. When Half Load option is
selected, Half Load led (i) will illuminate.
NOTE:
If you decide not to start the
selected programme, please see the
"Changing a Programme" and "Cancelling a
Programme" sections.
NOTE:
When there is insufficient
softening salt, the Salt Lack Warning
Indicator (ii) will illuminate to indicate the
salt chamber needs filling.
NOTE:
When there is insufficient rinse
aid, the Rinse Aid Lack Warning Indicator
(iii) will illuminate to indicate the rinse aid
chamber needs filling.
7.1. Changing a Programme
Follow the steps below if you would like to
change the programme while in operation.
Open the door and select a new
program using the Programme
Selection button.
After closing the door , the newly
selected programme will resume the
course of the old programme.
NOTE:
Open the door slightly at first to
avoid water spillage if you wish to stop the
wash programme before it is complete
Содержание IO-DWS-3135
Страница 28: ......
