113
5
Fill the detergent dispenser
Open the detergent dispenser flap by pressing the detergent dispenser tab to release the
lock as shown in the figure. The detergent dispenser features volume marking. Using these
markings (lines) you can measure the correct amount of detergent. The dispenser can
accommodate a maximum of 30g of detergent.
Open the pack with dishwasher detergent and in the case of heavily soiled dishes pour 25
cm³ det Close the flap by sliding it to the left
and then pressing it down. ergent into the main wash compartment (A) or 15 cm³ for less soi-
led dishes (B). If the dishes remained unwashed for an extended period of time or if food has
dried, pour 5 cm³ detergent into the pre-wash compartment and start the dishwasher. De-
pending on the amount of soil and the water hardness you may need to add more detergent.
Please note that the setting may be different depending on the water contamination.
Follow the manufacturer’s instructions on the detergent packaging.
Sliding it to the left
Press down
Please choose an open way accor-
ding to the actual situation.
1. Open the cap by sliding the
release catch.
2. Open the cap by pressing down
the release catch.
Add detergent into the larger cavity
(A) for the main wash cycle .
For better cleaning result, especially
if you have very dirt items, pour a
small amount of detergent onto the
door. The additional detergent will
activate during the pre-wash phase.
Close the flap by sliding it to the
front and then pressing it down.
