13
12
5 / PROGRAMMING
5 / PROGRAMMING
• Cotton program :
Thanks to the combined action of steam and
laundry tumbling, this program allows you to
rid "Cotton"-type textiles of wrinkles to facili-
tate their ironing.
This program lasts 18 minutes.
Choose your program using the
Programs
dial
. The indicator lights up, displaying your
choice.
Validate by pressing the "
Start
/Pause" button
.
G
G
A
A
• Mixed program :
Thanks to the combined action of steam, tum-
bling and laundry preheating, this program
allows you to rid "Mixed"-type textiles (polyes-
ter, synthetics, etc.) of wrinkles to facilitate
their ironing.
This program lasts 20 minutes.
Choose your program using the the
Programs
dial
. The indicator lights up, displaying your
choice.
Validate by pressing the "
Start
/Pause" button
.
G
G
A
A
• "STEAM" PROGRAMS
Your appliance is equipped with 3 “Steam” programs :
- Cotton
Pause
Stop
STEAM
- Aération
Thanks to their steam action, the "Cotton" and "Mixed" programs allow you to gently remove wrin-
kles from your laundry and soften creases, whether the fabric was air dried or put through the
dryer.
As a result, your ironing becomes faster and easier and some items can even be put away
without ironing.
The “Steam refresh” program lets you "air out" and freshen laundry that has been shut away in a
closet.
Important :
These programs can only be used for laundry that is already dry, just before ironing. We
recommend that you do not exceed the recommended load (see chart on following pages).
Important :
The steam programs should not be used with the following textiles : knitted wool ; leather;
clothing with metal, wood or plastic notions ; clothing made from metal that may rust ; oilskin or
other similarly coated garments.
Important :
The Steam tank is empty when your appliance is delivered. Before using the Steam pro-
gram for the first time, fill the tank with demineralised water or with water from the recovery tank
(see how to proceed in the "EVERYDAY MAINTENANCE" chapter).
Important :
Before starting a Steam program ensure that :
— The amount of water contained in the tank is above the "Min." level.
— The drying filter has been cleaned.
• Adding or removing an item during
drying :
Press “Start/
Pause
”
to interrupt drying and
open the door.
Insert or remove the item or items and close the
door.
Press the “
Start
/Pause” button
to resume drying.
Advice :
To ensure the effectiveness of the Steam
programs, you are discouraged from interrup-
ting these programs mid-cycle.
• Altering programming or drying during
operation :
If you have entered the wrong program, you can
change your selection during the cycle.
Press “Start/
Pause
”
to interrupt drying.
Select another program using the program dial.
Press the “
Start
/Pause” button
to resume
drying.
• Cooling cycle :
All programs finish with a cooling cycle that lasts
for a few minutes to allow the washing to cool
gradually.
Important :
Do not stop your dryer before this cycle
has finished.
• End of program and appliance stop :
At the end of program, the display shows
“0:00”
.
The “
Filter
”
and ““T
Ta
an
nk
k F
Fu
ullll””
lights flash
alternately to remind you that you must clean the
filter and empty the water collection tank after
every drying cycle :
— Press the “On/
Off
” button
.
— Empty your dryer.
Clean the
filter
and empty the
water collection
tank
(see the “REGULAR MAINTENANCE” sec-
tion).
H
H
G
G
G
G
G
G
G
G
Advice :
Consult the Programs table on the next page to determine the program needed for the type
of items.
Program stop
Time remaining
End of program
The “Filter” and “Tank Full” lights flash
Cooling cycle
Pause
Stop
+
-
Pause
Stop
+
-
Pause
Stop
+
-
- Mixed
