Fagor FG736, Руководство пользователя

Страница: 28 / 36

8
Product Operation
Battery Charging
A. Place charging home base against the wall, plug in adapter,
and signal light on charging home base will light up.
Note: Put charging home base against the wall and remove
obstacles about 1 meter distance at two sides and 2
meters ahead.
B. Turn on the power switch at the bottom side of the robot, and then display indicator will be in gradual
blue, the robot is in standby. (If no command received, the robot will turn to sleeping mode after 30
seconds)
C. Charge the robot in either way as shown below:
a. Plug the adapter into the robot and the other end to the power socket as below on the left;
b. Press HOME button on remote controller to direct the robot to charging home base for charging.
Note:
a. Please always keep the power switch turning on. If not, it is unable to make the robot work.
b. If power switch is turned off, all the scheduled operation will be lost.
c. Before charging the robot, please make sure the power switch is turned on, or else the robot cannot be
charged and CLEAN button indicator will have red flash and the robot beeps.
d. After fully charged, the robot will have 5 beeps. (Every charge will take no more than 5 hours).
e. In the working status, the robot will return to charging station automatically when battery power is low.
For extending battery life:
a. Before first use, charge the robot for 12 hours.
b. Charge the robot as soon as battery power is low.
c. The robot will return to charging station automatically when it finishes cleaning or battery power is low.
d. If the robot is not to be used for a long time, fully charge the battery, turn the power off, remove and store
it in a cool, dry place.
e. If the robot is not to be used for more than 3 months, charge the robot for 12 hours, turn the power off,
remove and store it in a cool, dry place.
Battery warranty 6 months