Clasp these two spring
buckles to lift up
Pull it
rightward then
Lift it
up first
01.Release the fixing screw on side brush with the cross screwdriver, then pull the side brush out directly, refer
to P3-9.
02.Assembly: Install the side brush into hexagonal shaft and then fasten the screw, refer to P3-10.
P3-9 P3-10
Cleaning of Main Brush
1.Disassembly of Main Brush
01.Clasp the two spring buckles beside the main brush, and raise the cover, refer to P3-11
02.Lift up the right side of main brush and then pull it out rightward. Take out the two brushes in turn, refer to
P3-12.
P3-11 P3-12
2.Assembly of Main Brush
01.Hold the brush and make the quadrangular side of the shaft leftward, refer to P3-13.
02.Insert the quadrangular side of the shaft to the exact left side of upper cover,push the brush into slightly,
then press the right side of shaft into exact position, showed as P3-14.
03.Close the cover and fasten the buckle.
