Fagor Evo CO-402 W, Инструкция по установке, использованию и техническому обслуживанию

Страница: 22 / 28

22
9.1.3 Preparation of the dishes
Before washing the dishes, the preparatory steps below should be followed:

Remove the largest pieces of waste from the dishes before placing them in the baskets.

Wash glassware first.

Put the plates in the rack basket.

Place the glasses upside down.

Place the cutlery in the cutlery baskets with the handles downwards. The different pieces of
cutlery can be mixed.

Place the cutlery baskets in the lower baskets.
9.1.4 Selecting the wash cycle
Before starting the wash cycle, place the corresponding basket containing the dishes in the machine
and close the hood/door. A wash cycle must be selected in order to start the wash. Each wash cycle
corresponds to a wash time that should be selected according to the user requirements. Press one
of these three programmes and depending on selected programme, one or other led will switch on,
the wash cycle will start automatically.
The hood/door must be closed for the machine to start the wash cycle. For safety
reasons, if the hood/door is open, the wash cycle will not start.
If you start your dishwasher prior to your boiler reaching a minimum of 180º F
(83ºC), YOU WILL HAVE AN EXTENDED WASH CYCLE!
9.1.4.1 Thermo-stop
The thermo-stop is designed to ensure a constant rinse at the maximum temperature. This means
that the machine continues washing until the boiler reaches the ideal temperature. Then the rinse
cycle starts.
If the mains water temperature is less than 50
⁰
C / 122
⁰
F, the installation of this
system may reduce the wash capacity of the glass washer.
9.1.5 Stopping the wash cycle and end of wash cycle
The wash cycle can be stopped in the following ways:

By switching off the machine
→
the cycle stops completely.

By opening the hood/door
→
when the hood/door is closed, the cycle continues.
At the end of the wash cycle, remove the basket and leave the dishes to dry naturally. Remove the
dishes from the basket with clean hands, taking care not to burn yourself as the dishes are extremely
hot.
9.1.6 Drainage of the machine
The dishwashers has two types of drainage; gravity drainage or using a drainage pump, which is
optional.
9.1.6.1 Drainage by gravity
To drain the machine in this way, just remove the overflow from the machine and it will drain
naturally. For reasons of safety, this method of drainage should only be used with the machine
switched off.