Fagor CNC 8058elite T, Руководство пользователя

Страница: 71 / 90

Probing (·T· model).
CNCelite
8058 8060
8065
CANNED CYCLES. CYCLE EDITOR.
4.
T
abl
etop prob
e ca
lib
ra
tion.
ꞏ71ꞏ
R
EF
. 2106
4.3 Tabletop probe calibration.
This cycle may be used calibrate the sides of the tabletop probe. Once the cycle has ended,
the user must enter the data returned by the cycle into the machine parameters that define
the position of the probe.
The calibration is carried out with a tool of known dimensions.
Requirements prior to the calibration.
To execute the cycle, use a master tool whose dimensions have already been defined in the
tool table. Since the probe needs to be calibrated along the X and Z axes, the location code
of the master tool must be F1, F3, F5 or F7.
Data returned by the cycle after the measurement.
Once the cycle has ended, the CNC returns the real values obtained in the measurement
in the following arithmetic parameters: All the values will be given in absolute coordinates
referred to machine reference zero.
Geometrical configuration of "Plane" type
axes.
Geometrical configuration of "trihedron"
type axes.
P298 Real coordinate of the measured side along the abscissa axis.
P299 Real coordinate of the measured side along the ordinate axis.
This value is given in radius.
P297 Real coordinate of the measured side along the axis perpendicular to the plane
(if it has been measured).
This value is given in radius.
X+
Z+
P
C
F7
X+
Z+
P
C
F1
X+
Z+
P
C
F5
X+
Z+
P
C
F3
X+
Z+
P
C
F1
X+
Z+
P
C
F7
X+
Z+
P
C
F3
X+
Z+
P C
F5