Probing (·T· model).
CNCelite
8058 8060
8065
3.
CA
NNED CYCLES. ISO CODED PROGRAMMIN
G
.
#PR
O
BE 4
. P
ar
t m
ea
su
ring
a
long the abscissa axis.
ꞏ58ꞏ
R
EF
. 2106
3.4
#PROBE 4. Part measuring along the abscissa axis.
This cycle measures the part along the abscissa axis. With this cycle, it is also possible to
correct the value of the wear of the tool used to machine the surface. The wear correction
only takes place when the measuring error exceeds a programmed value.
For this cycle, a probe mounted in the tool holding spindle must be used, it must be previously
calibrated with the tool calibration canned cycle.
Tool wear compensation.
To enable wear compensation, the calling instruction must define all the parameters ꞏTꞏ (tool)
and ꞏDꞏ (offset). The wear correction only takes place when the measuring error exceeds
the tolerance programmed in parameter ꞏLꞏ.
Data returned by the cycle after the measurement.
Once the cycle has ended, the CNC returns the real values obtained in the measurement
in the following arithmetic parameters:
If wear correction is enabled in the calling instruction, the CNC updates those values in the
programmed tool. This correction is applied only if the measuring error is equal to or greater
than the programmed tolerance.
P298
Actual (real) surface coordinate.
P299
Detected error. Difference between the actual surface coordinate and the
programmed theoretical coordinate.
Содержание CNC 8058elite T
