Fagor CCO-180 Скачать руководство пользователя страница 12

Страница: 12 / 79

02/05/2020

SERVICE MANUAL

CONVEYOR BELT
DISHWASHERS

10.

GENERAL INFORMATION AND WARNINGS

BEFORE INSTALLING AND STARTING THE APPLIANCE, PLEASE READ THE INSTRUCTIONS

CONTAINED IN THIS MANUAL CAREFULLY.

THIS APPLIANCE IS INTENDED EXCLUSIVELY FOR PROFESSIONAL USE AND MAY ONLY BE

USED BY QUALIFIED PERSONNEL. IT MUST BE INSTALLED AND REPAIRED EXCLUSIVELY BY

AN AUTHORISED AND QUALIFIED TECHNICAL SUPPORT SERVICE.

THE MANUFACTURER MAY NOT BE HELD LIABLE FOR ANY PROPERTY DAMAGE OR

PERSONAL INJURY RESULTING FROM THE INCORRECT INSTALLATION, USE,

MAINTENANCE OR REPAIR, OR CAUSED BY FAILURE TO COMPLY WITH THE STANDARDS

AND INSTRUCTIONS PROVIDED.

•

The placement, installation, repairs and/or modifications must always be carried out by an

Authorised Technician

in accordance with the manufacturer's instructions and the

applicable regulations.

•

Any installations, adjustments or repairs carried out by unauthorised personnel, incorrect

maintenance or use, the use of spare parts other than those supplied by the manufacturer

and any other type of alteration to the appliance may cause damage or injury and result in

loss of cover under the warranty.

•

Ensure that the earth connection operates correctly and efficiently.

•

If the appliance breaks down, please call the

Technical Service Centre

NOT

try to repair

it or allow unauthorised or unqualified personnel to do so.

•

Do not change the position of or handle the machine components, as this may affect the

operating safety.

•

The dishwasher must be correctly levelled and the electrical cables, water and drainage

hoses must not be trapped or contain kinks.

•

The appliance has been designed to operate at ambient temperatures ranging from 5

⁰

C to

⁰

C and must not be used at temperatures below 5 ºC.

•

This dishwasher is designed to wash plates, trays, glasses and similar tableware containing food

and drink waste. Any other use will be considered inadequate

Objects other than those described

above, or objects contaminated with petrol, paint, steel or iron shavings, fragile objects or those

which are not dishwasher-resistant must

NOT

be washed in the dishwasher.

•

During cleaning or maintenance operations, the dishwasher should be disconnected from the

electricity supply at the mains and the water inlet tap closed.

•

Abrasive or corrosive products, acids, solvents, or

CHLORINE/HYPOCHLORITE

-based detergents

must never be used.

•

The appliance or any of its parts

must never be used

as a support and objects must not be placed

on top.

•

Do not open the door of the machine while the machine is operating. Do not immerse hands in the

washing solution. Switch off the appliance and drain the tub before accessing the inside of the

machine.

•

Do not install the appliance in places exposed to jets of water.

IMPORTANT

WAIT AT LEAST 10 MINUTES AFTER SWITCHING OFF THE MACHINE BEFORE

CLEANING THE INSIDE OF THE APPLIANCE.

WARNING

DO NOT INSERT HANDS AND/OR TOUCH THE INTERNAL PARTS OF THE TANK WHILE

THE MACHINE IS OPERATING AND WAIT 10 MINUTES AFTER THE WASH TANK

HAS DRAINED.

Содержание CCO-180
















































































Результаты поиска

Содержание CCO-180

Отзывы:

Похожие инструкции для CCO-180

Бренды по названию

Популярные бренды

Fagor CCO-180, Руководство по обслуживанию

Результаты поиска

Содержание CCO-180

Отзывы:

Похожие инструкции для CCO-180

Бренды по названию

Популярные бренды