TROUBLESHOOTING
In the event of any fault:
•
turn off the appliance,
• disconnect the power supply,
• based on the instructions given in the table below, some minor issues can be corrected
by the user. Please check the consecutive points in the table before you refer the repair to
customer service.
Problem
Reason
Remedy
1. The appliance does not
work
No power
Check the fuse, replace if
blown
2. Oven lighting does not
work.
Loose or damaged bulb
Replace the blown bulb (see
Cleaning and Maintenance
section)
3. The programmer display
shows “0:00”.
The appliance was discon-
nected from the mains or
there was a temporary
power cut.
Set the current time
(see ‘Use of the programmer’)
4. Fan does not work
Risk of overheating! Immediately unplug the appliance or
switch off the main circuit breaker. Refer the repair to the
nearest service centre.
If the problem is not solved, disconnect the power supply and report the fault.
Important!
All repairs must be performed by qualified service technicians.
66