Fagor 8H-740BX, Инструкция по эксплуатации

Страница: 51 / 60

51
Energy saving function
1. When the appliance is in standby, press the button for three seconds, the
display will turn off and the appliance will enter the power saving mode.
2. When the appliance is in standby mode and you do nothing for 10 minutes, the
display will turn off and the appliance will enter the power saving mode.
3. In power saving mode, press any button or turn any knob to activate the appli-
ance.
Pyrolytic cleaning
Oven pyrolytic self-cleaning. The oven heats up to a temperature of about 480°C.
Grilling or baking residue is burnt into an easy to remove ash that can be wiped off
with a damp cloth.
Note! Before starting the pyrolytic cleaning, please see “Cleaning and Maintenance.”
1. Turn the knob K1 to select the pyrolytic cleaning — the display will show “PyR.”
2. Press to confirm your selection. The default time is 2 hours, the display will
show “PyR.”
3. Turn the knob K1 to change the duration of pyrolytic cleaning. The duration can
be adjusted from 1:30 to 2:00 hours.
Note!
• When the oven door is not fully closed, the pyrolytic cleaning will not turn on and
the display will show “door, PyR.”
• If the oven chamber temperature exceeds 320°C and you press the “Start” but-
ton, the display will show “CooL, PyR/” The oven interior must first cool down.
• If the oven chamber temperature is lower than 200°C, pressing the button
will stop the pyrolytic cleaning - press the button again to turn off the appliance.
• If the oven chamber temperature exceeds 200°C and you press the button,
the appliance will turn off.
• When you open the door while the oven is operating, the display will show “door”
and you will hear beeping until you close the door or press the to mute the
beeping.
• Make sure the oven is empty before activating the pyrolytic cleaning. Remove
wire shelf supports, telescopic runners and other accessories. Do not leave any
items such as pans, baking trays, dripping trays, etc. inside the oven, as high
temperature may damage these items.
• Do not turn off the power within one hour after the pyrolytic cleaning has com -
pleted.
Delayed start
You can set the oven to start at a specific time and operate for a set Duration. You
can delay the oven start from 1 minute to 23 hours 59 minutes, and set the Duration
for up to 10 hours.
1. Press to activate the delayed start.
2. Turn the knob K2 to set the delay 0 to 23 hours.
3. Press the button again to confirm the number of hours of delay.
4. Turn the knob K2 to select the minutes. The range is from 0 to 59.
5. Do not press . Turn the knob k1 to select the desired oven function
6. Press to set the Duration and cooking temperature.
7. Use the knob K1 to set the Duration and knob K2 to set the cooking temperature.
8. Press to confirm, and the delayed start symbol will appear on the display.
Press for 3 seconds to check the delay time.
9. After the delay time has elapsed, you will hear a beep and the appliance will start
cooking.