Fagor 8065 M, Руководство пользователя

Страница: 80 / 94

Panel PC.
CNC 8065
4.
·80·
(R
EF
: 1801)
PPC-19.
4.4.3 Securing the module.
The module must be installed in a proper enclosure that may be located on the machine or
on an external support. To insert the unit into the enclosure, it must have a big enough hole
to allow to insert it easily, without obstacles and without forcing the unit.
The module is mounted from inside the enclosure. Once the unit has been inserted into the
enclosure, secure it from the inside with the tension jacks. To properly secure it, use all the
tension jacks on the back of the unit.
Mounting the equipment.
1 Installing the monitor in the enclosure.
2 Fasten the monitor on the rear, using all the fastening hooks.
1 2 3
1.3 Nm