Fagor 8035-M, Руководство по установке

Страница: 93 / 470

  
Installation manual
CNC 8035
MA
CHINE PARA
METERS
Genera
l ma
chine
p
a
rameters
4.
(S
OFT
M: V15.3
X
)
(S
OFT
T: V16.3
X
)
·93·
MPGNPUL (P82)
Parameter MPGNPUL (P82) indicates the number of pulses per turn of the electronic handwheel.
Example
Having a Fagor electronic handwheel (25 pulses per turn) we would like to move 1 mm per
handwheel turn.
1. Set the a.m.p. for the feedback input of the electronic handwheel AXIS1 (P0) through AXIS7 (P6),
to a value of 12 (Fagor 100P handwheel). Also set g.m.p. MPGAXIS (P76) to indicate which axis
has been assigned this handwheel.
2. Set parameter MPGNPUL=25 or 0 meaning 25 pulses per turn of the Fagor handwheel.
3. Since the handwheel outputs square signals and the CNC applies a x4 multiplying factor to them,
we get 100 pulses per turn.
4. The value to be assigned to parameter MPGRES depends on the axis resolution format.
With 5.3mm type display format, set MPGRES=1
With 4.4mm type display format, set MPGRES=2
With 6.2mm type display format, set MPGRES=0
Format Resolution
DFORMAT (P1) MPGRES=0 MPGRES=1 MPGRES=2
5.3 mm
4.4"
0.001 mm
0.0001"
0.010 mm
0.0010"
0.100 mm
0.0100"
4.4 mm
3.5"
0.0001 mm
0.00001"
0.0010 mm
0.00010"
0.0100 mm
0.00100"
6.2 mm
5.3"
0.01 mm
0.001"
0.10 mm
0.010"
1.00 mm
0.100"
Possible values
Integer numbers between 0 and 65535.
Default value: 0 (means 25)
Format Resolution
MPGRES=0 MPGRES=1 MPGRES=2
5.3 mm Resolution
Pulses / turn
0.001 mm
0.100 mm
0.010 mm
1.000 mm
0.100 mm
10.000 mm.
4.4 mm Resolution
Pulses / turn
0.0001 mm
0.0100 mm
0.0010 mm
0.1000 mm
0.0100 mm
1.0000 mm
6.2 mm Resolution
Pulses / turn
0.01 mm
1.00 mm
0.10 mm
10.000 mm
1.00 mm
100.000 mm