18
button
1
for about 3 seconds until you hear the
acoustic signal (beep).
The
LED 5
will now stop flashing.
To fit the carbon filter - Fig. 2:
1.
Disconnect the hood from the electricity.
2.
Remove the metal filters.
3.
Remove the protective grid by unscrewing the
two lateral fixing screws.
4.
Mount the carbon filter in place of the protective
grid using these same screws.
5
. Put the metal filter back into place.
To replace the carbon filter - Fig. 2:
1.
Disconnect the hood from the electricity.
2.
Remove the metal filters.
3.
Remove the old carbon filter and replace it.
4
. Put the metal filter back into place.
Cleaning
To clean the outside of the hood use a cloth
moistened with denatured alcohol or neutral
liquid detergents.
Clean also the accessible internal parts after
having removed the grease filters, the hood is
designed so this can be done easily and safely.
Never use products containing abrasive.
Wipe brushed stainless steel in the same direction
as the brushing to avoid scratching.
Clean the external surface of the cooker hood
almost once every 10 days.
Attention
Failure to observe the rules for cleaning the
appliance and changing and cleaning the filters
may cause fires.
Therefore, we recommend observing these
instructions.
Replacing the lamp
a)
Disconnect the hood from the electricity.
b)
Unscrew the light shield (Fig. 3).
c)
Replace the damaged lamp with a new halogen
lamp of 20Watt max.
d)
Refit the the light shield.
e)
Before calling for repair service because the
hood fails to light up, make sure the bulbs are
screwed in tightly.
GB
