Fagor 3LVF-620M, Инструкция по эксплуатации

Страница: 104 / 116

104
TURN ON THE APPLIANCE AND SELECT PROGRAMME
Turn on the appliance
1. Draw out the lower and upper basket, load the dishes and push them back.
It is commended to load the lower basket first, then the upper one.
2. Pour in the detergent.
3. Insert the plug into the socket. Make sure that the water supply is turned on to full pressure.
4. Close the door, press the Power button.
5. Choose a program, the response light will turn on. Then press the Start/Pause button, the
dishwasher will start its cycle.
1
2
Change programme
A program can only be changed if it has been running only for a short period of time, otherwi-
se the detergent may have already been released or the wash waterm with detergent has
already been drained. If this is the case, the dishwasher needs to be reset and the detergent
dispenser must be refilled. To reset the dishwasher, follow the instructions below:
1. Press the Start/Pause button to pause the washing.
2. Press the ‘>’ button more than three seconds the machine will be in program selection
mode.
3. You can change the program to the desired cycle setting.
3
Add dishes during the programme:
A forgotten dish can be added any time before the detergent dispenser opens. If this is the
case, follow the instructions below:
1. Press the Start/Pause button to pause the washing.
2. After the spray arms stopped working, you can open the door completely.
3. Add the forgotten dishes.
4. Close the door.
5. Press the Start/Pause button, the dishwasher will continued to run after 10 seconds.
WARNING!
Be careful when opening the door during the dishwashing programme as hot steam
can be released and cause scalding.