Fagor 3IF-ZONE96C4S, Инструкция по эксплуатации

Страница: 53 / 68

53
OPERATION
Booster function "P"
The Booster function increases the nominal power of the Ø 220x184 mm cooking zone from
2100W to 3700W.
Selecting the cooking zone heat setting
When the cooking zone display ( 3 ) shows " 0 ," start setting the desired heat setting by sliding
your finger across the setting selection sensor (2).
If none of the touch sensors is touched within 10 seconds of switching on the appliance,
the cooking zone switches off.
When the pot is lifted from the cooking zone when the Booster function is in
operation, it remains active and the countdown continues.
When the appliance electronic circuits or induction coils overheat when the
Booster function is in operation, it is automatically deactivated. The cooking
zone continues to operate at its nominal power.
Operation of the Booster function is limited to 10 minutes. Once the Booster
function is automatically deactivated, the cooking zone continues to operate at
its nominal power.
The Booster function can be reactivated, provided the appliance electronic
circuits and induction coils are not overheated.
If activating Booster function causes the overall power limit of a pair to be
exceeded, the heat setting of the other cooking zone in a pair will be automati-
cally reduced.
The amount by which power is reduced depends on the type of pot used.
Booster function control
Booster function can be activated on all cooking zones.
Two cooking zones arranged vertically form a pair. Booster function can be activated at any
time for one cooking zone in a pair.