Faema BARCODE, Использование и установка, Страница: 56 / 244

SELECTION REPETITION Function
This function can be activated in various ways:
1) setting the desired number at the repeats entry in the
beverage recipe (see CLIENT PROGRAMMING and
paragraphs referring to
Key Menu ). .
Note : To have access to customer programming,the function
must have been previously enabled by the installer “Technician
programming/Configuration/
Customer prog. YES ”.
2) Press any one of the selection keys and after about 3
seconds press the same key again for the number of
dispensed drinks required.
Note : This second mode can be used only if the “Technician
programming/Configuration/ Dispensing Stop: NO ” WAS
NOT enabled by the installer.
The number of dispensed drinks programmed is indicated on
the top left of the display. Press the
key and keep pressed
for about 3 sec. to reset.
NOTE . These functions are deactivated when error messages
and/or codes are displayed and the item “Technician program- “Technician program-
ming/Configuration/ Program. block ” is set on “YES".
The machine is equpped with a software program that makes
it possible to quickly change the coffee dose without needing
the technician’s assistance.
Note: This function is possible
ONLY if the entry “ bean key ”,
in the technical configuration menu, has been set to “YES” by
the installer.
To modify the coffee dose, access the programming key ( Tp )
and press the “bean” key ( BK ). The following will appear
on the display:
Press the key ( 32 ) for which you want to vary the coffee dose.
The following will appear on the display:
Use the “+” ( 30 ) and “-” ( 31 ) keys to set the number.
Coffee dose variation
CUSTOMER PROG.
KEY MENU
MM 1 cof. dose 064
-5 064 +5
-
+
The dose set for both grinders in the technician programming
menu can vary by ±5.
Example
Technician programming Customer programming
Coffee dose MM1 045 Coffee dose MM1 040÷050
Coffee dose MM2 020 Coffee dose MM2 015÷025
To exit the panel, press the key to confirm any changes
made to the numbers or press the RES ( 24 ) key to leave
the settings as is.
Tp
BK
32
32
54
English