Pic. 5
This distance
depends on B
(Pic. 7 and Pic. 8)
Rear fixing
Front
fixing
WARNING:
if any welding is carried
out to complete the front
fixing with Hindi 880-evo
installed,
make sure the shaft is
suitably protected.
Make sure the operator
is levelled in all
directions before fixing it
IMPORTANT: in case of heavy gates, it is recommended that
fixing to the gate post and gate leaf be stronger by providing
rigid patching plates (not supplied by the manufacturer).
Reinforcement patching plate
(optional). With heavy
installations, it is recommended
to provide a plate adequate to the
gate type.
PREPARING THE FIXING PLATES
First weld the front and rear fixing plates to the patching plates (Pic. 5), after assessing the installation measurements as indicated
in Pic. 6 and Pic. 7 (or in Pic. 8, in the case where opening is required to be outwards).
!
!
universal oil-hydraulic operator for swing gates
HINDI 880 - evo
English
17
Pic. 6
Misalignment between post- and gate-fixings:
HINDI 880-evo: stroke 150 and 280 mm
23 mm
HINDI 880-evo: stroke 400 mm
35 mm
istr_hindi880evo_GB.ai 5 18/06/2018 11:25:20
