Oil level
sight glass
Fill with oil
through here
Funnel
equipped to
the unit
CONNECTING OIL PIPES
Lead the oil copper pipes to the jack joints through the previously laid duct.
FILLING WITH OIL
Drive 700 motor pump and jack come without oil inside, which is to be poured into the unit after piping has been completed.
To fill the motor pump with oil, pull the funnel out and turn it upwards as described in Pic. 13.
Pic. 12
Pic. 13
English
Drive 700 jack
Drive 700 Estru motor pump
IMPORTANT: any bending of the copper pipes is to be smooth and free from sharp corners.
The copper pipes with their glands must be securely tightened into the joints by the nuts.
IMPORTANT: carry out the electrical connections to the motor pump so the first running
test open and close can be made allowing oil to be pumped into the jack as well.
!
!
1)
2)
3)
3 mm
Underground oil-hydraulic operator with separate motor-pump
DRIVE 700
9
istr_drive700_GB.ai 9 10/05/2022 15:15:51
