Faderfox micromodul LV3, Руководство пользователя

Страница: 6 / 8

Settings in system mode
- hold down both black FX & master buttons for about 1 second to start system mode > yellow sys led is lit
- push encoder 1 = absolute mode for encoders 1 - 4 (only track functions)
- push encoder 2 = acceleration mode for all encoders
- push encoder 3 = panorama function on encoder 3
- push encoder 4 = send functions on encoder 4 (push for send A, turn for send B)
- FX-key (black) = absolute mode for encoder 1 - 4 (only global functions)
- Master-key (black) = absolute mode for scene-encoder
- FX1-key (gray) = stick-track-mode (left joystick follows track selection)
- FX2-key (gray) = scene-mode (scene-encoder starts/stops only the scenes)
- scene-encoder (display 0-4) = 5 different command-sets for joysticks & scene-encoder
depending on stick-track-mode (off) and scene-mode (off)
- black select keys + shift = select a function for these keys (see table below)
- green keys = select a function for these keys (see table below)
- green keys + shift = select a function for these keys (see table below)
- blue keys = select a function for these keys (see table below)
- blue keys + shift = select a function for these keys (see table below)
track control is active for a whole button row if there is no function selected (see table below).
function-table (printed on front panel above blue keys):
1 = clip launch
2 = clip stop
3 = track active (unmute)
4 = track solo
5 = record arm
6 = track monitor switch
7 = track-send A on/off
8 = track-send B on/off
- press both gray FX1 + FX2 buttons to reset all settings ( factory reset )
- hold down both black FX & master buttons for about 1 second to
leave system mode
> yellow sys led off