Faderfox micromodul EC4, Руководство пользователя, Страница: 7 / 16

Setup mode
Setup mode allows adjustment of general settings. These include different MIDI routings, display brightness
and special functions for the encoder buttons. Additionally, you can copy setups and groups, reset setups
(factory reset), and send/receive setup data as SysEx (backup/restore).
Start or exit setup mode by holding the blue FUNC key and pressing encoder 4 quickly.
A small arrow on the first line of the right side of the screen lights up to show active setup mode.
Setup data will be stored automatically.
Routing, brightness (disp) and push selections take effect immediately.
To open copy, paste, reset, send or receive menus, simply press the corresponding encoder buttons quickly.
Routing (turn Encoder 2)
Merging of received MIDI data to controller data.
@@ no
no MIDI routing
@@ UM
USB In to MIDI Out
@@ MM
MIDI In to MIDI Out
@@ MU
MIDI In to USB Out
MUUM
MIDI In to USB Out + USB In to MIDI Out
MMMU
MIDI In to MIDI Out + MIDI In to USB Out
Display brightness (turn Encoder 6)
00%
....
99%
display brightness
Send setup data (press Encoder 10 quickly)
Options menu:
Send @ current @ setup @
Send current setup (hold encoder 4 while running bar lines shown)
Send @ all @ setups @@@@
Send all 16 setups (hold encoder 8 while running bar lines shown)
@@@@@@@@@@@@@@@@@@@
@@@@@@ Cancel @@@@@@@
Cancel options menu (press encoder 16 quickly)
The percentage counter in the display shows the progress.
Abort the process is possible by pressing encoder 16 shortly.
Data will be send as SysEx dump to both USB and MIDI ports
Receive setup data (press Encoder 14 quickly)
Work @ in @ progress @ 0%
Shows the progress when receiving data
@@@ Receice Error @@
Wrong SysEx file or other receive problems
Abort is possible by pressing encoder 16 shortly.
After activation of receive mode send setup data from any SysEx dumper software to the device.
(e.g. Snoize librarian or MidiOX)
It’s strictly recommended to avoid sending SysEx data to USB and MIDI in ports simultaneously!
The percentage counter in the display shows incoming MIDI data.