factoryfurniture.co.uk
Introduction
Design
Design, shop drawings and development by
Factory Furniture Ltd.
Manufacture
Factory Furniture manufactured components. Products
are assembled in Factory workshops, checked and
dispatched ready for installation. Replacement products
or components thereof should be ordered direct from
Factory Furniture Ltd.
Copyright
The design copyright for the product and drawing
copyright remains the sole property of Factory Furniture
Ltd.
General Specifications
1.0M Planter
Metric
length 1000mm | width 1000mm |
height 900mm
Imperial
length 3’ 3½” | width 3’ 3½” | height 2’ 11½”
Approx Weight
329kg
Liner Capacity
500ltr
Forklift Centres
440mm
1.5M Planter
Metric
length 1500mm | width 1500mm |
height 900mm
Imperial
length 4’ 11” | width 4’ 11” | height 2’ 11½”
Approx Weight
525kg
Liner Capacity
1300ltr
Forklift Centres
890mm
2.0M Planter
Metric
length 2000mm | width 2000mm |
height 900mm
Imperial
length 6’ 6½” | width 6’ 6½” | height 2’ 11½”
Approx Weight
705kg
Liner Capacity
2400ltr
Forklift Centres
890mm
Detailed Material & Finish
Specifications
Slat Panels
•
Manufactured from FSC® certified tropical
hardwood
•
Profiled and left untreated as standard
(oil or
microporous woodstain treatment available on
request)
•
Slats mounted onto 2 no. stainless steel fixing rails
per panel (4 no. fixing points per slat) to create
the slat panel which is then screwed onto frame
assembly. There are 4 slat panels per planter
Internal Frame Assembly
•
Manufactured from mild steel box section with an all
welded construction and hot dip galvanised finish
•
Frame has an integrated pre-galvanised mild steel
sheet liner - after assembly liner joints are sealed
using exterior grade silicon sealant. Side and base
liner panels are screwed to internal frame
•
Drainage holes in base liner panel
Rim
•
Manufactured from stainless steel - satin polish
finish and featuring an all welded construction
•
Downstand secured to planter frame assembly
General Maintenance
(Recommended Schedule & Guidelines)
Daily/Weekly/Monthly
(or as adopted)
Visual checks of table / stool top, frame and base -
check all items for superficial or physical damage
Three Monthly
Clean all items as detailed below check all fixings are
seated correctly
Six Monthly
Secure all fixings; full clean as detailed below
Specific Maintenance Details
FSC Timber
Clean with a stiff brush once per year, especially in more
exposed locations, in order to prevent a verdigris type
build up on the timber surface. Ideally this should be
completed in early spring. During the cleaning stage,
all exposed timber surfaces should be inspected for
C005669
Responsible
Forest Management
