Introduction
Design
Design, shop drawings and development by Factory Furniture Ltd.
Manufacture
Factory Furniture manufactured components. Products are assembled in Factory workshops, checked and
dispatched ready for installation. Replacement products or components thereof should be ordered direct from
Factory Furniture Ltd.
Copyright
The design copyright for the product and drawing copyright remains the sole property of Factory Furniture Ltd.
General Specifications
Bench
Metric
length 1950mm | width 430mm | height 450mm*
Imperial
length 6’ 5” | width 1’ 5” | height 1’ 5½”
Not inc100mm below ground level for sub-surface fix option
Approx Weight
84kg
Fixing Centres
1895mm (6’ 2½”) x 300mm (12”)
Seat
Metric
length 2050mm | width 470mm | height 775mm*
Imperial
length 6’ 8½” | width 1’ 6½” | height 2’ 6½”
Not inc100mm below ground level for sub-surface fix option
Approx Weight
123kg
Fixing Centres
1895mm (6’ 2½”) x 300mm (12”)
Detailed Material & Finish Specifications
Bench / Seat
• Manufactured from either stainless steel (satin polished) or mild steel (hot dip galvanised or polyester
powder-coated
(powder coat colour grey as standard or to customer specification)).
• Anchored with 4 no. zinc-coated M10 x 75mm sleeve anchors into fixing lugs (surface & sub-surface fixing
options available)
General Maintenance
(Recommended Schedule & Guidelines)
Daily/Weekly/Monthly
(or as adopted)
Visual checks of bench / seat - check all items for superficial or physical damage.
Three Monthly
Clean all items as detailed below; check all fixings are seated correctly.
Six Monthly
Secure all fixings; full clean as detailed below; check that bench is firmly secured to the ground
Specific Maintenance Details
Stainless Steel
(polished stainless steel only)
Clean as required, but at least every three months, using a stainless steel polish and a lint free cloth. To remove
ground in dirt, a stainless steel finishing pad may be required.
Polyester Powder Coated & Galvanised
For general cleaning using a damp cloth and warm soapy water only. Scourers and abrasive cleaners are NOT
suitable for these types of finish and may damage them. Before using cleaning agents to remove graffiti etc.
try on a small inconspicuous area first to avoid causing more unsightly damage.
2
BLOC (steel) specification
