Factor O2 VAM DISC, Инструкция по сборке, Страница: 6 / 18

Place the battery holders around the Di2 battery. The male
shell grooves must match with the female battery groove.
Insert the seat post clamp into the frame. Note: you may
find it easier to keep this from falling down into the frame if
you coat it in carbon prep compound, and/or tilt the frame
downwards
Secure the seat post by carefully tightening the grub
screw to 5.5-6Nm
1-5
Insert battery into seatpost
1-6
Assembly Manual 02
1-4
Apply Black Inc Installation Compound to the inside
of the seat tube. Connect the Di2 cable to the
battery. Insert seat post into the frame to the
desired height.
1-7 1-8
Note: Your Factor frame set requires a minimum
of 90 mm of seat post insertion. The minimum
insertion is clearly marked on the seat post.
Failure to achieve the minimum insertion could
cause damage to the seat post or frame resulting
in serious injury or death.