Installing conference microphone system
SYSTEM CONNECTION
OTHER INSTRUCTION
1. The
CM-CHAIR/switching adaptor
can be located anywhere in
the system.
GMC-10
can be at start or end of system only.
2. This conference system may consists of up to 20 units, in which only one
can be installed.
3. The conference system adopts a CAT.5e/CAT.6 network connecting the
CHAIRMAN and other microphones to the amplifier with cables and a
converter (
GMC-10
).
4. The
is equipped with speech priority in particular.
5. Each unit, excluding under CHAIRMAN priority mode, will shut off
automatically after a five-minute idle.
6. To prevent feedback noise, please adjust the GAIN and the volume before
operating the multi-unit conference system.
7. The network cable Cat.5E UTP has to meet TIA/EIA-568-B.2 standards
with copper wires of 24AWG-1/0.49A*4P (CM/UL).
CM-CHAIR
CM-CHAIR
GMC-10
c
onverter
switching
adaptor
15V 4.3A
CAT.6
cable
(
recommended
)
Active speaker
6
.
3mm
audio
cable
CAT.6
cable
(recommended)
