Front Panel Operation and Connections
Preset Buttons 1-6 -
The pre-set buttons provide access to the tuner per-sets and
work in conjunction with the AM/FM, Auto Scan, Memory and Clear buttons. Press
pre-set buttons 1-6 to instantly recall stations once stations are stored in the pre-set
memory. To instantly store a station, navigate to the desired station by pressing then
turning the tune knob then press the memory button. Now press one of the pre-set
buttons 1-6 then press the memory button again to confirm your selection. The
station will be automatically stored in that location. NOTE: there are 4 pre-set levels
and 48 pre-sets that can be stored in the internal memory. Press the AM/FM buttons
to cycle from AM1, AM2, FM1, FM2, FM3, FM4, FM5 and FM6 with 6 memory locations
in each level.
AM/FM -
The AM/FM buttons provide access to the AM band (press AM) and the FM
band (press FM). Press these buttons repeatedly to access the 2 AM and 6 FM pre-
set levels.
www.factorelectronics.com
ST/MONO -
The VT series tuners are stereo devices. In some commercial sound
applications it will be advantageous to change the output to mono. Switching the
tuner to MONO will provide up to two mono line level outputs per tuner that can be
used to feed multiple amplifiers.
SEEK + SEEK-
Press Seek + and the tuner will scan to the next valid station in
ascending order. Press Seek – and the tuner will scan to the next valid station in
descending order. Continue pressing Seek +/- until you find the station you are
searching for.
