4
CONTROL INTERFACES:
Three different inputs are available plus control of treble, bass & volume. Control the unit from the
front panel buttons, IR remote or RS-232.
Source selection using the IR remote control
˙
Input 1: Stereo RCA (default source) and Bluetooth. (Note the RCA and Bluetooth inputs are
paralleled together. It’s best to turn your RCA source off when using Bluetooth
˙
Input 2: Stereo 3.5mm
˙
MIC 6.3mm unbalanced
Audio levels and tone settings using the remote control
˙
The overall volume range (0 lowest ~ 20 highest),the factory preset power up
value is 5
˙
Bass (L.1 lowest ~ L.9 highest), the factory preset value is 5
˙
Treble (H.1 lowest ~ H.9 highest), the factory preset value is 5
˙
Mute : No signal output.
Note:
The unit has a handy memory function for the following functions: Source Selection, Volume,
Bass, Treble and Mute. When the unit is powered OFF then ON all your previous settings will be
restored. All functions can be reset back to the factory default settings again. Press and hold the
“Mute” button for 3 seconds until the red LED illuminates steadily after flashing 3 times. Use the
amplifier front panel MUTE button or the IR remote control MUTE button to activate the reset
feature.
BT RECEIVER MODULE
•Play back audio signals from any BT-enabled device Version 2.1 Use PC’s,
note book’s or MP3 players or Smart phones that support the A2DP profile
•The blue LED indicator shows the modes of operation for the BT receiver as follows: blinking for
pairing mode, a steadily light ON means a successful connection has been completed between the
BT-enabled device and the receiver
•A Unique 4-digit alpha-numeric ID for identifying each individual receiver is provided when multiple
units are used in one location.
• Reception Range: of up to 30 feet can be achieved depending on the building structure and
environmental conditions.
More on setting up your Bluetooth devices later in this manual under BLUETOOTH OPPERATIONS
• For indoor use only. Keep away from extreme temperatures, humidity, and moisture.
System power requirement: 24V, 2.5A
Dimensions:
125mm (L) x 90mm (W) x 45mm (H) BT module included –MICRO-PRO2-BT
www.factorelectronics.com
