9
1
2 3
4
5
6
7
10
8
12
11
WARNING
1. To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed
control device.
2. If the supply cord is damaged, it must be replaced by the manufacturer, or its service agent
or a similarly qualified person in order to prevent a safety hazard.
3. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk
of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug
does not fit all the way into the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not attempt to bypass this safety feature.
4. Do not leave the fan running unattended.
5. Do not run the cord under carpeting. Do not cover the cord with throw rugs, runners, or
similar coverings. Keep the cord away from traffic areas, where it will not be tripped over.
RULES FOR SAFE OPERATION
1. Fan should be used according to the rated voltage.
2. Connect power after the fan is fully assembled.
3. Never insert fingers, pencils, or any other objects through the grille when the fan is
running.
4. Unplug the fan before cleaning or moving.
5. Unplug the fan when removing grilles for cleaning.
6. Be sure the fan is on a stable suface when operating to prevent it from tipping over.
7. DO NOT use the fan in a window.Rain may create an electrical hazard.
PARTS LIST
1. Front grille
2. Blade
3. Plastic nut
4. Rear grille
5. Motor shaft
6. Oscillation knob
7. Fan body
8. Spinner
9. Base
10. Speed control buttons
11. Tighten
12. Loosen
CAUTION
For safe operation, read these rules and instructions carefully.
1. Detach the screw from the base of the fan.
2. Match the locking tab to the base and click into position.
3. Tighten the screw in the base to secure the fan to the base.
BASE ASSEMBLY
2
