PARTS OF THE HEATER
Parts of the Heater
1. Power indicator light
2. Control Dial
3. Safety Grille
OPERATING INSTRUCTIONS
5
To operate, connect to a properly polarized outlet only. Match wide blade of plug to wide slot and
fully insert. Be sure to plug into a 120V AC, 60Hz outlet.
NOTE: THE HEATER WILL NOT OPERATE UNTIL THE POWER THE UNIT IS PROPERLY
PLUGGED INTO A POLARIZED OUTLET AND POWERED ON ( SEE SECTION ON
POLARIZED PLUGS UNDER SAFETY INSTRUCTIONS ).
YOUR HEATER IS EQUIPPED WITH
3
CONTROL SETTINGS.
Low heat setting
High heat setting
Power OFF
Heat setting Controls
HIGH HEAT SETTING
LOW HEAT SETTING
OFF
•
•
The dial in this position will set temperature to HIGH heat output. The unit is ON and
the power indicator light will be illuminated.
•
•
Use this setting for faster warm-up of a room or for colder weather.
The dial in this position will set temperature to LOW heat output. The unit is ON and the
power indicator light will be illuminated.
Use this setting to reduce electrical consumption and to prevent the room from
becoming too warm.
•
•
Turn the dial counter-clockwise to power the heater OFF.
At this setting, the unit will not produce heat and power indicator light will be OFF.
