Factair F8104, Руководство по эксплуатации

Страница: 17 / 28

16
5. Exporting Test Results and PC Software.
To transfer the datalog from the F8104 Safe-Air Monitor to the PC software you must first install the
software on your PC. This is available in the download section of Factair’s website:
http://www.factair.co.uk/downloads
To transfer the datalog from the Safe-Air Tester to the PC software, turn on the F8104, connect the
USB cable between the F8104 and your PC and open the Safe-Air Tester Results F8000 series
software.
With the F8104 successfully connected the
status light will turn green.
The unit will then automatically read the
instruments firmware version, saved test
results and the size of the data monitoring file.
The data log file can be downloaded by
clicking on this button. Results are stored in a
CSV format.
The monitoring log file on the F8104 SD card
can also be deleted using this software.
When complete you can save the test result file.