7
EN
TECHNICAL DATA:
HOW TO RECHARGE A BATTERY.
Initially, the charger must not be connected to the mains. Connect the clips to the battery.
-Red clip on the positive (+) terminal.
-Black clip on the negative (-) terminal.
The charger will then operate in test mode, and the battery charge level will be shown:
The battery does not need recharging.
The battery can be recharged.
The battery must be recharged..
BOOST mode must be used.
If the LED is fl ashing, the battery must be immediately recharged.
The battery charge display will vary during charging until the maximum level is reached. When the maximum level is reached, the
indicator will fl ash for a few minutes. This indicates that the charger is performing a fi nal test on the battery. If the result of
this test is inconclusive the indicator will light and the battery is unserviceable. If the result of the test is positive the indicator
will remain on.
No display:
The polarities may be reversed, the battery may be incorrectly connected, or permanently unserviceable.
BC124
BC128
BC2430
BATTERY VOLTAGE
12 V
12 V
12 V and 24 V
GUARANTEE
2 YEARS
2 YEARS
2 YEARS
BATTERY CAPACITY
3 Ah to 80 Ah
20 Ah to 160 Ah
90 Ah to 600 Ah
EFFECTIVE POWER
60 W
120 W
450 W
MAX. EFFECTIVE
CURRENT.
4 A
8 A
30 A
TRADITIONAL CHAR-
GER EQUIVALENT
10 A
16 A
50 A
Red clips
Black clips
NU-BC_0109.indd 7
NU-BC_0109.indd 7
04/02/2009 11:35:37
04/02/2009 11:35:37
