Li-ion batteries are consumables not covered by the guarantee.
The lamp’s autonomy is specifi ed for new batteries.
OPERATION
-
Before fi rst use, charge the
779.CL3
inspection lamp for 3 hours.
The LEDs on the lamp blink to indicate charging. Once charging is complete, the LEDs are switched off.
- When switched on, the lamp’s intensity increases gradually to preserve LED lifetime.
- The lamp’s light intensity rises gradually when it is turned on to preserve the lifetime of the LEDs.
- When the operating time left drops to 1/4 hour, the lamp switches off and switches on instantly every
15
seconds.
- Batteries are sensitive to temperature: autonomy variations can occur at low temperatures.
- The
779.CL3
inspection lamp resists to most products and solvents used in automotive repair and
industrial shops (white spirit, petrol, diesel fuel, brake fl uid, engine oil).
MAINTENANCE
- Never immerse the
779.CL3
inspection lamp in a cleaning product.
- Use a dry cloth with soapy water to clean your
779.CL3
inspection lamp.
- Use only FACOM spare battery packs, reference
779.
CL316
.
- Using non-compliant packs or improper usage can cause leaks or an explosion which would damage the lamp.
- Use only the
779.CL313
mains adapter supplied by FACOM. Using other mains adapters can cause
electrical hazard and start a fi re.
- Before any prolonged use of the lamp, perform a full discharge-recharge cycle.
This product has been designed and manufactured using high quality, recyclable and reusable materials and
components.
The crossed wheeled bin symbol applied to the product indicates that it complies with European Directive
2002/96/EC.
Please inquire about the collection of electrical and electronic products in your area.
Please comply with the local regulations. Do not dispose of this product with your normal household waste.
Before disposing of lamp
779.CL3
, remove the battery
779.CL316
and comply with local recycling
regulations.
WARNING:
Replace any leaking batteries. Wear goggles and gloves when handling this battery.
Used batteries must be placed in a leak-tight container for recycling in accordance with the local regulations.
779.CL316
779.CL31
779.CL312
779.CL313
+
+
779.CL316
Li-ion
➡
NU-779.CL3_1212 modifié.indd 5
NU-779.CL3_1212 modifié.indd 5
1/8/2013 2:25:49 PM
1/8/2013 2:25:49 PM
