3 Network settings
Go to [Main Menu] .> [System] .>[Network], as follows:
[IP address]:default is 192.168.1.10;
[Subnet Mask]:default is 255.255.255.0;
[Gateway]”default is 192.168.1.1
Note:IP address of the speed dome must share the same network segment
With the rounter and conform to its IP instead of conflicting with other IP to ensure
the device access to network;Go to [main menu]>[system]>[network],select DHCP
Enable[Router should enable DHCP]
4 Record settings
DVR must contain HDD,as follows:
4.1 HDD management
After installing HDD ,boot up the DVR ,go to<main menu>-<advanced>-storage> to
formate the HDD, then set the HDD as read-
Write.
Note:At leaste one read-write disk is needed for normal recording;
4.2 Video settings
Go to<main menu>-<record>-<Record Conf.>.