Unified Security Gateway Quick Start Guide
© 2001—2008, FaceTime
®
Communications, Inc.
Unified Security Gateway Quick Start Guide
© 2001—2008, FaceTime
®
Communications, Inc.
© 2001—2008, FaceTime
®
Communications, Inc.
Verification
To verify whether the security appliance has been set
up successfully:
1. Select the
Real time Usage View
option on the
Dashboard
tab.
2. Notice the counters in the
Real-Time Traffic
Summary
panel increase as security appliance
gets the data feed from the SPAN port.
Factory Default
To reset the configuration of the security appliance to
factory default settings:
1. Go to the
Configuration
tab »
Troubleshooting Tools
panel » click
Shut
Down/Restart
open the Shut Down/Restart
page.
2. Select
Restart System
.
3. Click
Restart
.The Boot screen appears on the
monitor connected to the security appliance.
The screen times-out after 3 seconds.
4. Press any key within 3 seconds.
5. Select
Factory Default
.
Web Filtering, Malware, IM, and P2P security
policies
Web Filtering, Malware, IM, and P2P usage
statistics
Any custom groups, employees, and buddy
names that were created in the system
Powering Off
The unit can be shut down using the Web-based
administration interface. Do the following to shut
down the unit:
1. Go to the
Configuration
tab »
Troubleshooting Tools
panel » click
Shut
Down/Restart
to open the Shut Down/Restart
page.
2. Select
Shut Down System
.
3. Click
Shut Down
.
FaceTime Communications
1301 Shoreway, Suite 275, Belmont, CA 94002, USA
Customer Support
Phone: (650)631-6400
E-mail:
Documentation
For the latest version of
Unified Security Gateway System Administrator’s
Guide
, visit:
http://usg.facetime.net/usg/
General Information
Press: [email protected]
Sales: [email protected]
Copyright 2001—2008, FaceTime® Communications, Inc. All
rights reserved.
Not for use or distribution without the express permission of
FaceTime Communications. FaceTime, the FaceTime logo
and Unified Security Gateway are trademarks of FaceTime
Communications, Inc. in the United States and other
countries. All other names mentioned in this document may
be trademarks of their respective owners.
Part Number:4B-10-QSG02-080616
Caution:
When you select Factory Default
settings, the following configuration settings will
be deleted from the system:
Note:
You can also
power off the unit manually
by pressing the Power button
on the
front panel for about 8 to 9 seconds.
Unified Security Gateway
Quick Start Guide
