5 of 9
(2019 YEAR MODELS)
1. Disconnect the negative terminal on the battery. Jack up
the front end of the truck and support the frame rails with
jack stands.
NEVER WORK UNDER AN UNSUPPORTED
VEHICLE!
Remove the front tires. Using a paint pen mark
straight line down the center of the coilover at the top cap,
lower spring perch and the lower mount.
SEE FIGURE 1
2. Starting with the passenger side. Disconnect the ABS
wire bracket from the upper control arm and the brake line
bracket from the knuckle. Save hardware.
SEE FIGURES
2-3
FIGURE 2 - STEP 2
3. Remove the factory tie rod end nut and strike the knuckle
with a hammer till the tie rod end comes loose. Save
all hardware. Use care not to hit any other parts.
SEE
FIGURES 4-5
FIGURE 3 - STEP 3
FIGURE 4 - STEP 3
STRIKE
HERE
FIGURE 5 - STEP 3
FIGURE 1 - STEP 1
Mark
Here
