Illustrations, clockwise from top center:
Duo brackets, a pair of end caps, installation screws and
four bead chain stops.
BEFORE YOU BEGIN, VERIFY THAT YOU HAVE ALL THE NECESSARY
PARTS AND PIECES:
• PACKAGE -
Contains two ROLLER shades, two universal
duo brackets, a pair of end caps, installation screws and
four bead chain stops.
1. Installing the Duo Brackets
Use a level to ensure a horizontal position. Both duo
brackets are universal and have cross-shaped holes.
They can be used on either side as well as for WALL, CEILING
or INSIDE MOUNT INSTALLATION.
The outside bracket to bracket should be 1
³⁄₈
” greater
than the cloth widths.
(This applies to a
ROLLER SHAD
E mounted on the
front and a
ROLLER SHADE
mounted on the back.)
Showing an inside
mount window bracket
installation here
2. Installing the Back Shade
a) Sort out your shades.
Begin by installing the back shade first. The transit clip
should be positioned either straight up and down, or
horizontal, in order to line up the idler plunger of the idler
end with the cross shaped hole in the bracket. See
illustration below.
Remove the transit clip so the shade can be pushed into
place.
b) Slip the clutch end into the lower back bracket.
While keeping the idler end in position, lift the shade up
into the bracket and align the clutch end pin into the
middle of the cross-shaped hole. Gently slide in place
and pull down to lock in place.
c) Slip the transit clip back onto the idler end. This ensures
proper spacing and alignment.
transit clip
(in horizontal
position)
Insert clutch end
Pin locked into place
Clutch end with pin
locked into place
