Fabman Bridge FB-V2 Скачать руководство пользователя страница 3

 

 

Never  position  the  product  in  direct  vicinity  of  a  bathtub,  shower,  bathroom,  swimming 
pool, or similar. Lethal hazard due to electric shock.

 

 

The product must not be exposed to extremes of temperature, direct sunlight or strong 
vibrations.  Keep  the  product  away  from  strong  magnetic  fields  generated  by  machines, 
electric motors or loudspeakers.

 

 

Do not operate the device in environments where there are high levels of dust, flammable 
gases, vapors or solvents. There is a danger of fire and explosion.

 

 

The product may get warm when it is powered. Therefore it must be surrounded by air - do 
not cover it with any material.

 

 

Do not use this product in hospitals or medical institutions. Radio waves may interfere with 
medical equipment. The same may also apply to other areas. 

 

 

Use the product only in a temperate climate, never in a tropical climate.  

 

 

The mains plug shall remain readily operable.  

2.3. Handling and use  

 

Never plug in, unplug or operate the product when your hands are damp or wet. There is a 
risk of a life-threatening electric shock.

 

 

Never connect the product to the power supply immediately after it has been transferred 
from  a  cold  room  into  a  warm  one  (e.g.  during  transport).  The  condensation  that  forms 
might destroy the device. Moreover, there is danger of electric shock. Allow the product to 
reach  room  temperature.  Wait  until  the  condensation  has  evaporated.  This  might  take 
several hours. Only then the product may be plugged into the mains socket and put into 
use.

 

 

Always  use  the  gripping  surface  to  pull  a  mains  plug  out  of  the  product.  Never  unplug  a 
mains plug from a mains socket by pulling the cable. 

 

 

Never  overload  the  product.  Note  the  maximum  permissible  connected  load  in  the 
chapter ‘Technical Data’. 

 

 

Disconnect the product from the mains socket in thunderstorms for reasons of safety. 

 

 

Do not use the product if it is damaged. There is a risk of a life-threatening electric shock in 
this  case,  dispose  of  the  product  in  an  environmentally  correct  manner.  Safe  operation 
can no longer be assumed if: 

 

 

the product shows visible signs of damage 

 

the  product  does  not  work  at  all  or  works  poorly  (leaking  smoke  or  a  smell  of 
burning,  audible  cracking  noises,  discoloration  to  the  product  or  the  adjacent 
surfaces) 

 

the product was stored under unfavorable conditions 

 

it was exposed to heavy loads during transport  

 

Never pour any liquids above or next to the product. You run the risk of causing a fire or a 
fatal electric shock. If any liquid has still managed to enter the device, immediately switch 
off the power supply to the mains socket at which the product is connected (turn off the 
fuse / circuit breaker / residual current operated circuit breaker of the associated circuit). 
Only then can you unplug the product from the mains socket and contact a specialist. Do 
not use the product any longer.

 

 

Always pull the product out of the mains socket (e.g. wall socket) before cleaning it or when 
the device will not be in use for a long time (e.g. for storage). 

 

Содержание Bridge FB-V2










Отзывы: