CHANGING ULTIMAKER 2 NOZZLE
All steps completed. New nozzle with fitting tube.
!
4
HOWTO ULTIMAKER 2 NOZZLE
Страница 1: ...he clog I changed and tried several filaments Four original Ultimaker PLA filaments gold green dark blue and grey One original Ultimaker ABS white One white innofil filament Even in my dreams I change filament of the UM2 It becomes a nightmare After contacting the Ultimaker phone support they sent the following spare parts for free Heated bed Red clip Grey tightener Nozzle First I changed the heat...
Страница 2: ...ight print I saw this error in the morning in the Ultimaker LCD display The Ultimaker 2 extruder block is quite a block so nobody realized this massive plastic problem The temperature sensor was broken and the tube was harmed from the permanent filament change and manual pull back So I called the Ultimaker phone support again and they sent this other spare parts for free Temperature sensor cable T...
Страница 3: ...s that hold the printhead together After that you heat up the printer and can unscrew the nozzle by putting a hex key in one of the holes of the round metal part above the nozzle and turn it from right to left Once the nozzle is loose you will have to loosen the long set screw a bit so you can take out the heater cartridge and temperature sensor Next you can reverse the process to place the new no...
Страница 4: ...CHANGING ULTIMAKER 2 NOZZLE All steps completed New nozzle with fitting tube 4 HOWTO ULTIMAKER 2 NOZZLE ...
