FabiaTech Low Power FB2403, Руководство пользователя

Страница: 39 / 80

FabiaTech Corporation
¾
Serial Port Mode
This field is select Serial port1 can use any mode. Just keep in mind that the bits per
second, data bits, parity, and stop bits must match terminal setting.
Available Options: 115200 8,n,1/57600 8,n,1/38400,8,n,1/19200,8,n,1/9600,8,n,1
Default setting: 9600, 8, n, 1
¾
Flow Control
This field is Serial port1 can use flow control for console redirection.
Available Options: None, Hardware and Software
Default setting : None
¾
Redirection After BIOS Post
These fields is select redirection is active during post and during boot loader or
always active or off active. (Some Oss may not work if set to Always)
Available Options: Disabled, Boot Loader and Always
Default setting : Always
¾
Terminal Type
This field is selecting the target terminal type.
Available Options: ANSI, VT100 and VT-UTFB
Default setting : ANSI
¾
VT-UTF8 Combo Key Support
This field is select VT-UTF8 combination key support for ANSI/VT100 terminals.
Available Options: Enabled and Disabled
Default setting : Enabled
¾
Sredir Memory Display Delay
This field is givens the delay in seconds to display memory information.
Available Options: No Delay, Delay 1 Sec, Delay 2 Sec and Delay 4 Sec
Default setting : No Delay
33