FabiaTech FX5638 Series Скачать руководство пользователя страница 5

Страница: 5 / 78

FabiaTech Corporation

Chapter 1 Introducing the FX5638 System

Overview

The FX5638x is an embedded system with Intel® Core™ i5 -4422E (Haswell) CPU

module inside. This user’s manual provides information on the physical features,
installation, and BIOS setup of the FX5638.

Built to unleash the total potential of the 4th generation

Intel® Core™ i5 Processor,

Able to support 1.8 GHz CPU, this system supports two 10/100/1000M Base –TX LAN
ports, PCIE Mini Card connector for Wireless/GPRS modules, two SATA ports (One

for CFAST, and one for SATA SSD or Hard disk), four USB 2.0 and four 4 3.0 ports,

Audio, two So-DIMM sockets supports up to 16 GB DDR3L RAM, two HD and VGA
display ports.

Each FX5638x has four ports for I/O communications. Two RS-232C ports and two

RS232/RS422/ RS485 ports are available.

The FX5638x is perfect for ATM machines, KIOSK, point-of-sales/point-of- information,

gaming and infotainment, measurement technology, lotteries, banking and Thin

Client and Embedded Control.

Содержание FX5638 Series















































































Результаты поиска

Содержание FX5638 Series

Отзывы:

Бренды по названию

Популярные бренды

FabiaTech FX5638 Series, Руководство пользователя

Результаты поиска

Содержание FX5638 Series

Отзывы:

Бренды по названию

Популярные бренды