FabiaTech FX5612, Руководство пользователя

Страница: 33 / 68

FabiaTech Corporation
28
IDE Primary/Secondary Master/Slave PIO
IDE hard drive controllers can support up to two separate hard drives. These drives
have a master/slave relationship, which is determined by the cabling configuration
used to attach them to the controller. Your system supports one IDE controller – a
primary and a secondary – so you have the ability to install up to four separate hard
disks.
PIO means Programmed Input/Output. Rather than have the BIOS issue a series of
commands to affect a transfer to or from the disk drive, PIO allows the BIOS to tell
the controller what it wants and then let the controller and the CPU perform the
complete task by them. This is simpler and more efficient (and faster). Your system
supports five modes, numbered from 0 to 4, which primarily differ in timing. When
Auto is selected, the BIOS will select the best available mode.
IDE Primary/Secondary Master/Slave UMDA
Ultra DMA/33 implementation is possible only if your IDE hard drive supports it and the
operating environment includes a DMA driver (Windows 95 OSR2 or a third-party
IDE bus master driver). If you hard drive and your system software both support Ultra
DMA/33, select Auto to enable This option allows your hard disk controller to use the
fast block mode to transfer data to and from your hard disk drive (HDD).
IDE HDD Block Mode
This option allows your hard disk controller to use the fast block mode to transfer
data to and from your hard disk drive (HDD).
OnBoard Device
USB Controller
Select Enabled if a USB device is installed to the system. If Disabled are selected,
the system will not be able to use a USB device.
Available Options: Disabled, Enabled
Default setting: Enabled