FabiaTech FP8151 Series Скачать руководство пользователя страница 30

Страница: 30 / 72

FabiaTech Corporation

Virus Warning

This option may flash on the screen. During and after the system boots up, any
attempt to write to the boot sector or partition table of the hard disk drive will halt

the system and the following error message will appear, in the mean time, you can

run an anti-virus program to locate the problem.

Available Options: Disabled, Enabled

Default setting: Disabled

CPU L1& L2 Cache

This functions speeds up System access. The CPU has an internal cache.

Available options: Disabled, Enabled

Default setting: Enabled

Quick Power On Self Test

This option speeds up Power On Self Test (POST) after you power on the computer.

If it is set to Enable, BIOS will shorten or skip some items’ checks during POST.

Available options: Disabled, Enabled

Default setting: Enable

First /Second /Third/Boot Other Device/ Boot Device

This field specifies which device the system looks first upon power on.

Available options: Floppy, LS120, HDD, CDROM, ZIP100, USB-FDD, USB-ZIP, USB-
CDROM, LAN and Disable

Default setting: HDD, CDROM, LAN

Boot Up NumLock status

This field is used to activate the Num Lock function upon system boot. If the setting

is on, after a boot, the Num Lock light is lit, and user can use the number key.

Available options: On, Off

Default setting: On

Gate A20 Option

This item is chosen as <Normal>, the A20 signal is controlled by keyboard controller
or chipset hardware.

Содержание FP8151 Series









































































Результаты поиска

Содержание FP8151 Series

Отзывы:

Похожие инструкции для FP8151 Series

Бренды по названию

Популярные бренды

FabiaTech FP8151 Series, Руководство пользователя

Результаты поиска

Содержание FP8151 Series

Отзывы:

Похожие инструкции для FP8151 Series

Бренды по названию

Популярные бренды