FabiaTech FB2701 Скачать руководство пользователя страница 61

Страница: 61 / 86

FabiaTech Corporation

Quiet Boot

This item allows users to enable or disable Quiet boot option. If Enable, an OEM LOGO
is shown instead of POST messages.

Available Options: Disabled, and Enabled

Default setting: Disabled

Fast Boot

This field is used to activate the fast boot function of the system. When set to Enabled,

boot with initialization of a minimal set of devices required to launch active boot
option. Has no effect for BBS boot options.

Available Options: Disabled, Enabled

Default setting: Disabled

GateA20 Active

UPON REQUEST - GA20 can be disabled using BIOS services. ALWAYS - do not allow

disabling GA20; this option is useful when any RT code is executed above 1MB.

Available Options: UPON REQUEST, and ALWAYS

Default setting: UPON REQUEST

Option ROM Message

Set display mode for Option ROM

Available Options: Force BIOS, and Keep Current

Default setting: Force BIOS

INT19 Trap

BIOS reaction on INT19 trapping by Option ROM: IMMEDIATE - execute the trap right
away; POSTPONED - execute the trap during legacy boot.

Available Options: Immediate, and Postponed

Default setting: Immediate

Boot Option Priorities

This item allows users to set boot device priority. Set the boot device options to

determine the sequence in which the system checks which device to boot from. The
settings are Hard Driver BBS Priorities (Removable Storage Dev., Hard Drive), and

CD/DVD ROM Driver BBS Priorities (USB CDROM).

Содержание FB2701























































































Результаты поиска

Содержание FB2701

Отзывы:

Бренды по названию

Популярные бренды

FabiaTech FB2701, Руководство пользователя

Результаты поиска

Содержание FB2701

Отзывы:

Бренды по названию

Популярные бренды