FabiaTech Fanless FX5613, Руководство пользователя

Страница: 33 / 61

FabIATech Corporation
27
DRAM Timing
If the installed SDRAM supports SPD function, select SPD. If not, you can select
based on other access time of the SDRAM.
Available Options: Auto By SPD, Manual, Turbo and Ultra
Default setting: Auto By SPD
DRAM CAS Latency Time
This field specifies the latency for the Synchronous DRAM system memory signals.
Available Options: 1.5, 2, 2.5 and 3
Default setting: 2.5
AGP & P2P Bridge Control
AGP Aperture Size (MB)
This field specifies the system memory size that can be used by the Accelerated
Graphics Port (AGP).
Available Options: 4MB, 8MB, 16MB, 32MB, 64MB, 128MB, 256MB, 512MB and 1GB
Default setting: 64 MB
VGA Share Memory Size
This field specifies which VGA display memory. You can select either Video
memory on the VGA. There are setting share onboard memory.
Available Options: 16MB, 32MB and 64MB
Default setting: 64MB
Select Display Device
This field specifies which VGA display will be used when the system is boot. You
can select the CRT+TV or the CRT booting on the VGA.
Available Options: CRT+TV, DVI, CRT+DVI, and CRT
Default setting: CRT
CPU & PCI Bus Control
PCI1/2 Master 0WS Write
This field specifies the PCI1/2 Master 0 wait state installed in the PCI expansion bus.