Faber TENDER Series, Инструкция по эксплуатации

Страница: 9 / 24

EN
9
9
ELECTRICAL CONNECTION
• Connect the hood to the mains through a two-pole
switch having a contact gap of at least 3 mm.
• Remove the grease filters (see paragraph Mainte-
nance) being sure that the connector of the feeding
cable is correctly inserted in the socket placed on
the side of the fan.
1
7.2.1
2
2.1
2.2
8b
8a
12e
Chimney assembly
Upper chimney section
• Slightly widen the two sides of the upper chimney
and hook them behind the brackets 7.2.1 , making
sure that they are properly housed.
• Secure the sides to the brackets using the 4 screws
12c (2,9 x 9,5) supplied.
Lower chimney section
• Slightly widen the two sides of the section and
hook them between the upper section and the wall,
making sure that they are properly housed.
• Fix the sides of the bottom section to the hood
body using the 2 screws 12c (2,9 x 9,5) supplied.
• When installing the recirculation version, fit the
directional grills 8a – 8b in their housings so that
the directional symbols are at the top and towards
the front of the hood. Ensure that they are inserted
correctly in the outlet connection piece
15 .