Faber Relaxed Premium L, Руководство по установке, Страница: 11 / 24

L
10 < < < <
4.5 Mounting the smoke emission outlet materials

In case of a wall or roof terminal, the hole must be at least 5 mm bigger than the
diameter of the flue material.

Horizontal parts must be installed at a (3 degree) slope up away the appliance.

Build up the system from the appliance. If this is not possible, you should make use
of a adjustable pipe .

For fitting the system a ½ metre cut-down pipe should be used. Make sure the
inner pipe is always 2 cm longer than the outer pipe. Wall and roof terminal are
also shortened. These parts must be secured with a self tapping screw.

Do not insulate but ventilate bild-in flue material (approx.100cm2)
4.6 Building a false chimney breast.
Before constructing the false chimney breast we advise you to perform a function test with
the gas hearth as described in chapter 7 “checking the installation”
4.7 Chimney breast

Construct the false chimney breast from non- combustible sheet metal in
combination with metal profiles or of brickwork / aerated concrete bricks.

Take the grates and the service panel (see fig. 1.1 and1.2 )into account. Place a
protective shield made of non- combustible material above the grates (see
fig.1.1A) .

Always use a lintel if the chimney breast is constructed of brickwork. These should
not be placed directly onto the appliance.

Construct the chimney breast against the build-in frame (see fig. 1.1B).
Keep a minimum margin of 3 mm between chimney breast and the appliance in
connection with the expansion of the appliance.

The depth of the recess has no influence on the removal of the glass.