05
NO. TYPE OF FAULTY
CAUSES
SOLUTION
FAULT CHECK & TROUBLE SHOOTING
1.
Display screen is not on
1. No connection between
circuit and power cord
2. The display winding
displacement was perished
or loose
1. Check the switch, plug, appliance
coupler, fuse infact whether it is
inserted tightly to the plug.
2. It must be replace or re-assemble
E1
BOT open circuit
1. Check the RTC if it got loose, re-assemble it again
DISPLAY CODE AND ILLUSTRATION
E2
BOT open circuit
1. Check whether the connected wire is cutting out or not. If damaged,
change it
2. Check the sensor, if damaged, change it
2.
Display screen show beating
plate is hot heating
1. The middle wire
connection of heating
element got loose
2. The heating plate was
destroy
1. Replacethe power cord
2. Replace heating plate
3. Replace fuse
4. Send the product to repair
3.
Display screen is on but the
function key is not
functioning
1. The appliance is expose
to wet environment.
2. The setting key was
destroyed
1. Wipe the appliance and keep it in
a dry place for 24 hours or use the
hairdryer to keep it dry.
2. Replace the key
4.
Automatic turning into
keeping warm or the rice is
uncooked
1. Heating plate deformation
2. The inner pot deflection
3. Some objects exist in
between inner pot and
heating plate
4. The inner pot bottom
de-formation
5. Sensor wire got loose
6. Sensor wire was ruined
1. A slight deformation can be polished
by sand paper. if serious, send the
product to repair.
2. Put inner pot gently rotate, so as to
restore the normal.
3. Using the sand paper clean clearly
4. Send to the repair department
replace the inner pot
5. Put the power cord into the RTC
appliance coupler
6. Replace the sensor
5.
Porridge or Rice flow over
when cooking
1. Porridge capacity is more
than the maximun capacity
2. The ratio of rice and water
is incorrect
3. Release the stem is not in
time
1. Porridge litre must be in the 1/5 or
between 3/5
2. Put the rice in the pot according to
correct ratio
3. The glass lid should be put in semi-
open to increase air permeability
