GENERAL USAGE AND SAFETY GUIDELINES
NOTICE
1. Thank you for choosing Faber Cooker Hood. Please read the instruction manual carefully
before used/install.
2. The installation work must be undertaken by a qualified and competent fitter.
3. The manufacturer disclaims all liability for any damage or injury caused a a result of not
following instructions for installation contained in the following text. The cooker hood is used
on 220/240V, 50Hz.
FEATURE
1. The cooker hood uses high quality materials, and is made with a streamlined design.
2. Equipped with a large power low noise electric motor and centrifugal leaf, it produces strong
suction, low noise, non stick grease filter and easy to clean.
3. Special wind tunnel construction and oil collector design, free dirt will be absorbed in a
second.
NOTICE OF INSTALLATION
CORRECT
INCORRECT
1. Before installation, please ensure the are is clean to avoid suction of the remaining bits of
broken wood and dust.
2. It can not share the same air ventilation tube with other appliances such as gas tube, warmer
tube, and hot wind tube.
3. The bending of ventilation tube should be ≥1200 , parallel or above the start point and should
be connected to the external wall.
4. After installation, make sure that the extractor is level to avoid grease collection at the one
end.
3
