MAINTENANCE
Disconnect the power cord from the wall outlet before cleaning and maintenance. To clean the
applianes outside, use a damp cloth, a soft brush or a fine sponge, and then wipe it dry. Do not
use coarse abrasive cleaning agents or sharp metal scrapers for cleaning of the appliance as this
could result in the surface scoring. Never leave aggressive or acidic substances ( lemon juice,
vinegar ) on enamelled or stainless parts of the appliance.
Metal Grease Filters
When the appliance is in common use, the metal grease filters should be checked or cleaned
every month. In case of more frequent frying deep frying, shorten this interval.
Do not use the appliance without the metal grease filters properly installed!
1. Remove the metal filters as show in Fig. 1
2. Let the metal filters soak in warm water with the addition of a detergent or put them into a
washer with a cleaning agent and set temperature below 60°C. In case of soaking in warm water,
clean the metal filters with a fine brush, rinse them with clean water and let them dry.
3. Attach the dried filters back.
Charcoal filter ( to be purchased )
This filter is only used for the recirculation mode.
The filter contains an active carbon absorbing the smell being discharged. The active carbon
will be saturated after some time, hence the absorption capacity will be shortened. This filter
cannot be washed or cleaned in any other way.
When the appliance is in common use, the charcoal filter should be replaced every 2-3 months.
In case of more frequent frying or deep frying, shorten this interval.
1. Remove the metal filters as shown in Fig. 2
2. Install the charcoal filter on the side of the engine.
Cleaning and replacement of filters
GENERAL USAGE AND SAFETY GUIDELINES
Disconnect the power cord from the wall outlet before cleaning and maintenance.
To clean the appliance outside, use a damp cloth, a soft brush or a fine sponge, and
then wipe it dry.Do not use coarse abrasive cleaning agents or sharp metal scrapers
for cleaning of the appliance as this could result in surface scoring.
Never leave aggressive or acidic substances (lemon juice, vinegar) on enamelled or
stainless parts of the appliance.
Cleaning and replacement of filters
Metal grease filters
When the appliance is in common use, the metal grease filters should be checked
or cleaned every month. In case of more frequent frying or deep frying, shorten this
interval.
Do not use the appliance without the metal grease filters properly installed!
1.Remove the metal filters as shown in Fig. 1.
2.Let the metal filters soak in warm water with addition of a detergent or put them
into a washer with a cleaning agent and set temperature below 60 °C. In case of
soaking in warm water, clean the metal filters with a fine brush, rinse them with
clean water and let them dry.
3.Attach the dried filters back.
Fig.1
Oil drops from the
metal grease filer
Heavily fouled filer
Immediately clean or
replace the metal grease
filer
TROUBLESHOOTING
6
